11
Installation -
Cabling
1
Power Connection
Please, check the voltage and current capacity of rated
power carefully.
2
Network Connection
Connect the crossover cable into the RJ-45.
3
BNC Connection
Used to connect video output device such as monitor
using the BNC coaxial cable.
4
Audio Input
Connect the ‘Audio In’ cable of the camera to the device
like microphone.
AUDIO IN : PINK
AUDIO GND : PINK + DOT
AUDIO OUT : SKYBLUE
DI : SKY GREEN
DI COM : YELLOW
DO1 (N.O) : GREEN
DO1 COM : DOT
5
Audio Output
Connect the ‘Audio Out’ cable of the camera to device like
speaker.
Audio Out supports only RTSP Back channel function.
It plans to make it available on the web later.
6
Alarm Input/Sensor
Cable of the sensor/alarm input device should connect to
Yellow and Sky Green line of the Alam cable.
7
Alarm Output
It connects to the alarm lights, siren or lamps and the
sensor types are normal open and normal close.
Cable of the alarm output device should connect to DO1
(N.O.) and DO1 COM of the cable slot.
1
Power
2
Network
3
BNC
5
Audio Output
4
Audio Input
6
Alarm In
7
Alarm Out
Rate Power
Power
Consumption
PoE
DC 12V
11.9W
IEEE 802.3af class3
