CPMG Magma M1, Owner'S/Operator'S Manual

Page: 14 / 48

14
Cleanout Procedure
1. SETUP:
A) Place wand in port.
B) Pin wand trigger and set handle forward.
C) Set rotary switch to Clean Out.
D) Set flow to “9”
Hose Clean-out:
Let pump run in reverse for 2 minutes.
Pump Clean-out:
Unpin wand trigger.
Continue running pump in reverse for 2 minutes.
Shut down:
Shut Engine off by turning key to “0”
Set rotary switch to Off.
Move Boom to travel position and
lock .
Store wand
Contact material supplier for information on
how to flush out non-reheatable materials.