CPI TRML Series, Instruction Manual

Page: 4 / 47

TRML R
EMOTE
C
ONTROL
C
ONSOLE
4
S
PECIFICATIONS
subject to change without notice
Power Requirements
120VAC, 60Hz for wall pack (provided). Fused on circuit board.
Dimensions 9.5” x 4” x 7”
Weight TRML - 4.5lbs, with Deskmic Option - 5.2lbs
Audio Output to Speaker 2 Watts at 3% THD into 8 ohms, using supplied wall pack or
Handset Earpiece Level Adjustable via internal potentiometer
Frequency Response +/- 3dB from 300 to 3000Hz, except at notch frequency. 1000Hz reference.
Hum and Noise 50dB below operating levels
Transmit Notch Filter 2175Hz down 50dB from 1000Hz reference level
Receive Notch Filter 2175Hz down 50dB from 1000Hz reference level
Transmit Audio Compression Less than 3dB increase in output with 30dB increase in input beyond threshold.
Receive Audio Compression Less than 3dB increase in output with 30dB increase in input beyond threshold.
Threshold is adjustable from -24dBm to +15dBm.
Line Impedance 2 wire: 600 ohms or 2.4k ohms, dip switch selectable per line
4 wire: 600 ohms or 10K ohms, dip switch selectable per line
Line Output Level Factory set at 0dBm. Adjustable to +10dBm maximum
Control Tone Frequencies Guard Tone: 2175Hz @ +10dBm for 140ms
Function Tone: F1 1950Hz @ 0dBm for 40ms
F2 1850Hz @ 0dBm for 40ms
F3 1750Hz @ 0dBm for 40ms
F4 1650Hz @ 0dBm for 40ms
F5 1550Hz @ 0dBm for 40ms
F6 1450Hz @ 0dBm for 40ms
F7 1350Hz @ 0dBm for 40ms
F8 1250Hz @ 0dBm for 40ms
Monitor Tone: 2050Hz @ 0dBm for 40ms
Hold Tone: 2175Hz @ -20dBm for duration of PTT
Operating Modes Standard: Two wire simplex per line
Optional: Four wire simplex per line, Four wire duplex per line
Maximum Parallel Remotes 10 remotes per line
Connections Phone lines: 8 pin RJ45 modular jacks - TIA/EIA T568-B
Relay Outputs: 8 pin RJ45 modular jacks - TIA/EIA T568-B
Handset:
4 pin modular jack
Deskmic: 6 pin modular jack
Headset: 6 pin modular jack
Gooseneck: 3 pin plug, screw lock connector
Power: 3 pin EN3® weather tight locking connector