CPI ARAGON, Service Manual, Page: 54 / 93

OIL PUMP LB-4
Connect the oil leads to the pump.
Hook in the control cable and adjust the
cable play.
The lever must have a free travel
α of 5-8°.
The allowable adjustment track to the full
throttle position must be at least 70°.
BLEEDING
The pump body and the delivery line must be
bleeded subsequent to the reinstallation of
the oil pump.
During bleeding the engine should
run with with the correct oil/fuel
mixture ratio in order to ensure that
it is sufficiently lubricated.
Loosen the bleeder bolt and wait until the oil
drains out without bubbling.
Put the cable in the pump and adjust it as per
marking. The minimum marking must be
coherently oriented when the twist grip is
closed, and the maximum marking must be
coherently oriented when the grip is fully
opened.
Remove the delivery line at the carburetor
side and have the engine run until the oil runs
out without bubbling.
Connect the delivery line and check the
system for leakage.
Remove any oil reisues from the engine and
attached components.