CPG Compuprint SP 40, Maintenance Manual

Page: 123 / 144

Maintenance Manual SP 40
Rev. 005
113
Chapter 6
Paper Specification
Chapter 6 Paper Specification
6.1 Overview
The documents must all guarantee the following characteristics:
•
Use paper matching the indicated characteristics .
•
They must have well defined top and left edges , with a square angle tolerance of 0.1° on all edges.
•
The paper must not have holes, perforations, folds or tears anywhere within the print area of the document.
•
The radius on a corner of the form must be within 9.5 mm from the left or right edge.
•
The form to be printed must not contain foreign material .
•
Form opacity must be at least 75%. Forms with a lower opacity may cause feed errors.
•
Never print on documents with metallic or hard plastic fasteners or staples , they may damage the printer. Use
only sewn passbooks.
•
To get the maximum print contrast you should print on white or light colored paper. You may overstrike to improve
the low contrasting paper.
•
It is preferable to use single and multiple documents with the fibre running in the insertion direction of the printing
unit.
•
Recycled paper is permitted on principle.
•
It is preferable to print on multiple forms with a narrow glue strip or top-gluing . The gluing must not cause waving in
the set of forms.