201055 - DETAchAbLE hOSE REEL
ASSEMbLY
6
ASSEMbLY
NOTIcE
Carefully remove all parts from the packing box. Locate all
hardware and components before installation.
NOTIcE
Do not completely tighten bolts until assembly is completed.
For easier assembly, we recommend that two people assemble
this product.
WARNING
Ensure there are no live electric wires or plumbing in the wall
where you mount the hose reel.
WARNING
Always use eye-protection when using power tools.
Install Mounting Rail to Masonry Wall
1. Position the mounting rail on the wall at a convenient height.
2. Use a bubble level to ensure the mounting rail is horizontal.
3. Mark hole centre locations on the wall.
4. Using a 14 mm (35/64 in.) masonry drill bit, drill
approximately 3.8 cm (1.5 in.) deep centered on the marks
you made in step 3.
3.8cm
5. Using a hammer, lightly tap the masonry anchors into the
holes, being careful not to damage them, until fully seated.
Remove the nuts and washers.
6. Hang the mounting rail onto the exposed anchors.
7. Replace the nuts and washers, tightening them with
a wrench.
Install Mounting Rail to a Stud Wall
1. Locate the studs using a stud finder.
2. Position the mounting rail on the wall at a convenient height.
3. Use a bubble level to ensure the mounting rail is horizontal.
4. Mark hole centre locations on the wall.