7. Precautions
1) Use should not be allowed near high temperatures
such as fire extinguishers or heating equipment.
May cause explosion and ignition.
2) This product does not provide waterproof function.
3) Exposure to water can cause failure.
4) Do not store and use in vehicles exposed to
direct sunlight. May cause explosion and failure.
5) Do not use the machine under conditions of
–7°C or 50°C or higher.
6) Do not place it within the reach of infants. May cause injury or electric shock.
7) If used by a child, care must be monitored by the
guardian. May cause injury or electric shock.
8) Never insert any metal into the terminal of the charging
connector. Causes heat, explosion, and electric shock.
Disassembly or modification is absolutely forbidden.
9) Do not touch the connector with wet hands. There is a risk of electric shock.
10) Be sure to turn off the power and store it after use. This can cause product damage.
11) Do not bend the stand at a sharp angle. This can cause product damage.
12) If the main body of the product falls or is
impacted, damage can accumulate inside the
product and cause unexpected failure even in
normal use. Take care not to impact the main
body.
1) FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
2) Any changes or modifications (including the antenna) made to this device that are not expressly
approved by the manufacturer may void the user
’
s authority to operate the equipment.
3) This transmitter must not be co-located or operating in conjunction with any other antenna or
Transmitter
4) To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 mm must
be maintained between the antenna of this device and all persons. This device must not be co-located or
operation in conjunction with any other antenna or transmitter.
5) This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
