4
Installation
Components
Standard luminaire fitting
IP luminaire fitting
Part
Quantity
Supplied
IP Spacer with silicone coating
1
Silicone washer
1
5º washer
1
5º spacer
1
M20 nut
1
Mounting hole without key
Mounting hole with key
Note. Key to be at top of
sensor.
Note. Use the 5
º
spacers
where the luminaire
housing has a draft angle.
Important
Ensure that the silicone washer and/or the IP spacer are used to maintain IP rating.
Do not grip unit at the lens end. Hold the square body near the threaded end when installing and tightening the
nut. Care must be taken to prevent damage to the lens and surrounding IP seal.
