Use and Care Manual
10/11
Wellness for Home
•
Connect the two seat vibration connectors together as picture demonstrated.
Step 2
Step 3
a) Attach the backrest pad to the backrest by Velcro and zip up.
b) Attach the backrest pad to the seat pad with zipper.
c) Attach the seat pad to the footrest with zipper.
In the backrest pad, there is a
Strength-adjusting Pad. If a stronger
massage is desired, you can remove the
strength-adjusting Pad from the backrest pad
(as shown in the picture), and while a milder
massage is desired, just put back the
Strength-adjusting Pad into the backrest pad.
Step 4 : (Optional)
1. Restore the footrest to its original position.
2. Recline the chair to tilt approximately 45 degrees. Move the chair using the wheels as the
fulcrum.
Note:
•
Always return the footrest to its original length and restore it to its original position before
moving the chair, otherwise injury during movement may result.
•
Do not move the chair while a person is seated on it.
•
Place a mat on the floor and gently roll the chair over it to avoid damaging the floor.
MOVING THE CHAIR
c