
05-10433
October 2003
SAFETY INSTRUCTIONS
Read operator’s manual. Be thoroughly familiar with the controls, capabilities, and proper
use of the equipment.
NEVER ALLOW ANY RIDERS.
IMPORTANT:
This cab must only be used on tractors outfitted with a NON-FOLDING
ROPS.
DO NOT
place this cab on a tractor outfitted with a folding ROPS.
DO NOT
remove the top half of a folding ROPS to accommodate this cab.
Thoroughly inspect cab mounting periodically.
Stay alert for hidden hazards and traffic.
Avoid sudden starts, excessive speeds, and sudden stops when operating on hillside,
rough ground and most off-the-road operations.
Use extreme care when working close to fences, ditches, or on hillsides.
Wait for tractor to STOP before dismounting.
Check clearance carefully before driving under any objects.
Avoid operating sideways on a steep slope whenever possible.
ALWAYS buckle safety belt while operating tractor.
Never exceed factory recommended specifications.
DO NOT
weld, cut, drill or modify ROPS in any manner unless instructed by
manufacturer.
Page 2 of 26
Summary of Contents for A-11289
