background image

33

St

ep 1

0:

Turn the seat to the back and 

unlock the snap fastener

.

H10

H8

H9

St

ep 8

:

Fold the strap of both sides 

and hide under the booster cover

St

ep 9

:

Put the top tether in the bag

15.1 Da

i

ly ma

i

nt

e

nanc

e

1.Periodically check the child car seat on a  daily basis. In the event of an accident the 

child car seat should be replaced immediately.

2.

Please keep this child seat in a dry and ven�lated place to avoid damp and mold.

3.If the child seat becomes dusty,clean the seat belt and the plastic pieces by 

swiping them with a damp sponge and allow them to dry naturally.

4.If food or drink are accidentally dropped into the buckle, disassemble the seat belt 

from the child seat and rinse throughly  with warm water. Leave it to dry naturally.

5.For cleaning the entire child seat fabric cover,please refer to the 15.2 washing 

instructions.

15.2 Was

hi

n

g i

nst

r

uct

io

n

Never use any solvant,chemical detergent or lubricant on any part of your

child seat.

Hand wash,

water

temperature

below 30

Do not bleach

Dryclean,any

solvent except

trichloroethylene

Do not tumble dry

 

 

 

Do not

 

 iron

15.  Ma

i

nt

e

nanc

e a

nd cl

e

an

i

ng

St

ep 1

1:

cover (H11).

Pull in all direc�ons to remove the 

procedure to put on the put the fabric cover 

back on

F

o

ll

ow in re

v

er

s

e or

d

er

and

repe

at t

he

 

 

 

 

 

H11

34

Summary of Contents for EST226



















Reviews: