1. Take the top tether
18
out from the bottom
of the car seat, adjust the Top Tether by
pressing the Top Tether adjusting button
N
,
and pass underneath the vehicle seat
headrest.
2. Fit the top tether hook
17
onto the anchor
point according to the car manual, then tighten
the top tether
18
(tighten the Top Tether until
the indicator shows green).
1. If your vehicle is not equipped with the ISOFIX
insert guides as standard. Clip the two ISOFIX
insert guides
20
which are included with the seat
with the cut-out facing upwards onto the two
ISOFIX attachment point
C
of your vehicle.
Press both the ISOFIX 2nd lock button
14
, and
ISOFIX release button
15
, the ISOFIX can be
removed when there is a click noise.
When the height of the child is below ≤87cm, the
inner cushion
05
must be used.
Tips:
The inner cushion
05
ensures the child is
more comfortable and safer.
Notice
：
Never use the luggage hook as a
replacement for the Top Tether anchor.
Always check the vehicle manual and
locate the below mark.
Slide the SIP into the groove on the side
closest to the door.
Slide the SIP up, to remove it.
2. Press both the ISOFIX 2nd lock button
14
and
ISOFIX release button
15
, and extend the ISOFIX
16
.
3. Insert the ISOFIX onto the two ISOFIX anchor
points
C
, until there is a click and the indicators are
completely green.
4. Push the car seat towards the back of the seat
as far back as it will go.
5. Shake the base of child car seat to ensure the
ISOFIX is fixed firmly.
11
4-6 ISOFIX installation and removal
4-7 Top Tether usage
4-8 Inner cushion usage
12
Notice
：
You must ensure that the left and right
ISOFIX attachments are consistent before
using the child car seat.
ISOFIX Installation
ISOFIX removal
C
CLICK
CLICK
N
Installing the SIP
Remove the SIP
4-9 Side Impact Protection usage (SIP optional accessory)
05
Notice
：
If you use the SIP, the car seat may
not fit all vehicles.
