iAUDIO X5V
21
■
Line-In Record mode is a feature which allows the user to record sound from another audio device to
iAUDIO using the stereo cable shipped with the product.
1. Connect the headphone terminal of the CDP to Line-In terminal of iAUDIO with the stereo cable.
2. Turn the product ON and move to Line-In Record mode. [Please refer to “2) Basic Instructions
→ 2. Basic Operations for Switching Modes.”]
3. Pressing the “REC” button will stop the recording and stand-by until the audio signals come in.
Depends on the Auto Sync setup, [Please refer to “4) Detailed Description of Features by Menu
→ 8. Recording.”]
4. Pressing the “PLAY” button on the CDP will start the recording from iAUDIO.
5. Pressing the “REC” button again will stop recording.
6. To listen to the recorded files, press the “PLAY” button after the earphone is connected.
- To playback recorded files using features such as search, you may run the files in Navigator using Digital AV mode.
- If you were running Voice Record before turning off the product, it will resume in Voice Record mode when the power is turned
on again.
- Recording consumes more battery power than usual. Be sure to fully charge the battery before recording.
- The recorded file can be verified in “VOICE” of the upper most folder.
- The quality and capacity of the recording depends on the recording quality setup in addition to the reception.
[Please refer to “4) Detailed Description of Features by Menu → 8. Recording.”]
- Maximum capacity for a single recording is 268MB. A new file will be created and start recording if the capacity is exceeded.
- If there is less than 128MB space available on the hard disk, the recording will not start. If the available space becomes less than
128MB during recording, the recording will end.
- Up to 999 files can be recorded.
CDP Playback
4. LineIn Record Mode(Recording Using a Stereo Cable)
Instructions for Different Modes