Cowon CK20 ANC, Quick Start Manual

Page: 12 / 13

12 COWON CK20 ANC
+ Precautions
_ Resetting to Dual Mode (When the L and R units are not connecting to each other)
Delete connected device &
Turn off Bluetooth
Remove earphones &
Press the button twice
Check for purple LED Turn on Bluetooth Connection
Delete the [CK20 ANC]
device connected to your
smartphone or other
Bluetooth device and turn
off Bluetooth. Remove the left and right
earphones from the cradle,
and immediately press and
release the buttons twice
simultaneously. The LEDs on the left and
right earphones turn
purple, and the earphones
switch to the pairing
mode.
Turn on Bluetooth on
your smartphone or other
Bluetooth device.
Select [CK20 ANC] from
the detected devices to
complete pairing and
connect automatically.
* Use the following method for troubleshooting purposes only, not during normal operation, when the left and right earphones are not connected.
* Refer to 'Pairing & Connection' page when connecting the product to a smart device for the first time.
* If the L and R units only connect in single mode during normal dual-mode operation, reset to dual mode by following the instructions below.
*
If it fails to reset, start again from Step ②.
CK20 ANC
Off
Press
twice
L R
1 2 3 4 5
Press
twice