Coway Juicepresso CJP-02, User Manual

Page: 18 / 20

ImPorTanT SafeguardS
SAVE THESE INSTRUCTIONS.
When using electrical appliances, basic safety precautions should always be followed including the following:
• Read all instructions.
• To protect against risk of electical shock, do not put the motor base in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
• Avoid contact with moving parts.
•
DO NOT operate any appliances with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.
•
Return appliance to the nearest authorized service facility for examination, repair or electrical adjustment.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
• DO NOT use outdoors.
• DO NOT let cord hang over edge of table counter, or touch hot surfaces.
• DO NOT place on or near a hot gas or electric burner or in a heated oven.
• DO NOT use appliance for other than intended use.
• Be sure to switch to off position after each use of your juicer.
• DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the plunger or another
piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
• DO NOT plug in until familiar with all the instructions and operating procedures.
•
DO NOT unplug from electrical outlet by pulling on the cord. To unplug, grasp the plug, not the cord, and pull.
• Turn off all controls before unplugging from or plugging into an electrical outlet.
WARNING:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.