HOW TO USE
■
How to use Power Saving mode
Press the Power Saving button for more than 2 seconds, then Power Saving indicator
is on. In Power Saving mode, the motor and heater moves less in night so power
consumption decreases. When Light sensor detects the night, Power Saving indicator
blinks.
∗
In Power Saving mode, temperature of cold water is little bit higher than in day time.
■
How to use Lock mode
- Hot water Lock
Press Hot water Lock for more than 2 seconds, Hot water indicator blinks and
Hot water Lock is on.
∗
In Hot water Lock mode, Hot water button doesn't work and alarm rings.
∗
Hot water isn't extracted even if Extraction button is pressed.
- Button Lock
Every function doesn't work in Button lock mode and alarm rings if any button is pressed. Use this function when you
clean the device. Press Button Lock button for 1 second, then indicators blink and Button Lock is on.
- Release Lock mode
Press Hot water Lock/Button Lock button for 1 second to release Lock mode.
■
To use Hot water function
Press Hot water button for more than 2 seconds and check if Hot water indicator
is on. Press the button again to turn off Hot water function.
∗
It takes about 30 minutes to extract hot water after turning on Hot water function.
■
To use Cold water function
Press Cold water button for more than 2 seconds and check if Cold water indicator
is on. Press the button again to turn off Cold water function.
