Coway BA35-A, Manual

Page: 14 / 28

For front cleansing
■
Cleansing
When seated, press the ‘Front’ button.
- Cleansing water will spray for approximately 1 minute and then
automatically stopped.
- Self-cleaning is performed for approximately 6 seconds after
the nozzle retracts itself.
∗
If the ‘Front’ button is pressed again during the cleansing operation,
additional front cleansing is performed for another minute.
∗
While cleansing, users can adjust water pressure according to their preference.
∗
The bidet will not function without a person seated on the seat.
∗
For normal operation of the product, water pressure for ejection must be 0.1 MPa
(approximately 14.2 psi), above the minimum water flow standard (1 L/min).
∗
The nozzle may not extend when the toilet is flushed using the lever.
■
Stop
To stop the current operation, press the ‘Stop’ button.
- This stops all currently operating functions.
Tips
If the water pressure is too strong when you use the front or rear cleansing
feature, press the water pressure button to set the lowest level (level 1).
CHOOSING THE DESIRED CLEANSING