Coway Aquamega 200C, User Manual

Page: 17 / 110

4
7
6
5
Open the shut-off valve and the T-valve and
check for leakages.
Assemble the mesh filter and the stopper.
After flush the filters with Ambient water, fill
the cold water tank to start cooling. Select Cold
water and press the dispensing button for 2
seconds for continuous dispensing. It will take
about one minute to fill up the cold water tank.
After connecting the tube, plug the power cord
and, dispense the ambient water for 3 minutes
before using the cold water.
CAUTION
- For continuous dispensing, use a drain hose.
- Make sure that you run the ambient water to flush
the filters before using the cold water.
NOTE
You can drink cold water after about two hours from the installing the product.
17
EN