Coway AP-1009CH, User Manual

Page: 16 / 124

- Always unplug the air purifier before cleaning the product.
- Do not use detergents that contain organic solvents (solvent, thinner, etc),
bleach, chlorine, or abrasives.
- Do not put the air purifier in water or spray water directly on it.
Tips
clEaNING mEthoD
■ Cleaning the pollution sensor (every 2 months)
1. open the pollution sensor cover on
the right-hand side of the product.
clean the air inlet and outlet
vent and then the pollution sensor
with a soft brush or vacuum cleaner.
2. wet a cotton swab lightly and clean the lens, dust inlet,
and dust outlet. clean them with a dry cotton swab
to remove remaining moisture.

Without regular cleaning, the performance of the pollution
sensor deteriorates.

The cleaning cycle differs depending on the operation
environment. When using the product in a dusty environment,
clean the sensor more often.
■
Cleaning the air inlet and outlet (every 2 months)
clean the air inlet and outlet with a soft brush.

Exercise caution not to have dust fall inside the air purifier.
■
Cleaning the front cover
separate the front cover from the product and remove the
dust attached to the surface with a soft dry brush or cloth.

Use lightly wet cloth if the contamination is serious but do
not use abrasives.
■ Cleaning the product body (every 2 ~ 4 weeks)
clean the air inlet and outlet with a soft brush.

Exercise caution not to have dust fall inside the air purifier.
Air outlet
Air inlet
▶
Dust outlet
Dust inlet