Covidien WarmTouch, Service Manual

Page: 92 / 314

Performance Verification
7-8 Service Manual
7.5.4
Temperature Accuracy Test
Use the temperature accuracy test to verify that the unit’s output air tempera-
ture is within specification.
Requirements:
•
Temperature probe (see page 7-2 ).
To perform the temperature accuracy test:
1.
Perform steps 1 and 2 of the power-on test ( page 7-3 ).
2.
Fully compress the warming unit’s hose and position it vertically, nozzle facing up
(
Figure 7-4 ).
Figure 7-4. Position of Hose for Temperature Accuracy Test