1723 W. 4th Street Tempe Arizona 85281
P
: 800.638.6104
|
F
: 480.966.6728
|
E
|
www.covid.com
USER MANUAL
Page 4
Operation Controls and Functions
Transmitter
1 . POWER: This LED illuminates when the device is connected with power supply .
2 . DC 24V: Plug the 24V DC power supply into the unit .
3 . HD BaseT OUT: Standard HD BaseT signal output port . Connect HD BaseT receiver with a category cable
following the standard of direct interconnection method .
4 . HDMI IN: HDMI input port . This slot is where you connect the HDMI source .
5 . IR IN: Channel 2 IR Receiver . Connect with Wideband IR Rx .
6 . IR OUT: Channel 1 IR Transmitter . Connect with Wideband IR Tx .
7 . RS232: Phoenix jack provide Serial port control signal from receiver or to receiver .
8 . Connection Signal Indicator Lamp
*Illuminate: The Transmitter and Receiver are in good connections status .
*Flashing: The Transmitter and Receiver are in poor connections status .
*Dark: The Transmitter and Receiver are not connected .
9 . Data Signal Indicator Lamp
*Illuminate: The HDMI signal with HDCP .
*Flashing: The HDMI signal without HDCP .
*Off: No HDMI signal .
HDBase-T Slim-Line Transmitter - THB-200
