You will not be able to receive any other indications or displays for any other calls until you exit the Emergency Alarm
received screen.
NOTE: Short press, then long press the programmed Emergency button to clear the Emergency Alarm received
indications and exit Emergency mode.
□
Responding to an Emergency Alarm
Procedure:
When receiving an Emergency Alarm:
1. Press any button to stop all Emergency Alarm received indications.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.
If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is now available for use.
3. Press PTT button to initiate a call with the emergency initiating radio. The RED LED turns on. Your radio remains in
the Emergency mode.
4. Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone.
5. Release the PTT button to listen. When the emergency initiating radio responds, you see the Group Call icon, the
group ID, and transmitting radio ID on your display.
6. Once your call ends, short press , then long press the programmed Emergency button to clear the Emergency
Call received indications and exit Emergency mode.
7. The radio returns to the Home screen.
□
Sending an Emergency Alarm
This feature allows you to send an Emergency Alarm, a non-voice signal, which triggers an alert indication on another
radio.
Procedure:
1. Press the programmed Emergency button.
2. The display shows “Sending Alarm”, which alternates with your radio ID. The RED LED turns on and the Emergency
icon appears on the Home screen display.
3. When an Emergency Alarm acknowledgment is received, the Emergency tone sounds and the GREEN LED turns
on. The display shows Emergency Alarm Successful.
