FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
Cleaning and Maintenance
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming
upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your swivel glider.
In order to prolong the life and beauty of your swivel glider, we recommend that it be stored in a dry and
protected area during off season periods.
Step 5:
Fasten the seat post (#6) to the support frame (#5) by
using bolts (#13), washers (#16 and #18) and jam nuts
(#20). See Figure 5.
Step 7:
Insert the seat post (#6) into the hole in the center of
the base assembly (#8). Fasten them together by using
bolt (#11) and washer (#15). Make sure that all of the
bolts have been tightened completely. See Figure 7.
Note:
For ease with installation, we recommend that the seat
post (#6) be slightly olied or waxed before fastening it to
the base assembly (#8).
Step 6:
Place the decorative plastic cover (#7) on the chair's
base assembly (#8) as above picture A shows.
See Figure 6.
Step 8:
Turn the swivel glider to its upright position. Place the
cushions (#24 and #25) onto the swivel glider.
See Figure 8.
Caution:
To ensure one’s safety during use of this swivel glider,
make sure that all of the bolts are completely tightened.
This chair has the ability to swivel; therefore use by
young children should be adult supervised.
PAGE 3 OF 4
E-3
20
20
18
18
5
16
16
13
13
6
5
6
40
#13 BOLT M8*40
A
A
7
7
8
8
24
25
8
7
8
7
#11 BOLT M6*35
35
11
15
6
