FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
Step 1:
Place the back assembly (#1) onto a non-abrasive
surface, such as a carpet. Fasten the arms (#3 and #4)
to the back assembly (#1) by using bolts (#9).
Keep the bolts loose. See Figure 1.
Step 3:
Fasten the seat assembly (#2) to the back assembly
(#1) by using bolts (#10), washers (#14) and plastic
nuts (#19). See Figure 3.
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Figure 1 to ensure proper assembly.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
L
R
#9 BOLT M6*40
3
1
9
9
4
#9 BOLT M6*40
40
#9 BOLT M6*40
#9 BOLT M6*40
40
Step 2:
Fasten the seat assembly (#2) to the arms (#3 and #4)
by using bolts (#9). Keep the bolts loose.
See Figure 2.
Step 4:
Turn the seat assembly to its upright position.
Fasten the support frame (#5) to the arms (#3 and #4)
by using bolts (#12) and washers (#17). See Figure 4.
PAGE 2 OF 4
E-3
2
9
9
2
3
4
1
10
19
3
4
14
#10 BOLT M6*65
65
#12 BOLT M8*30
30
12
17
17
17
3
4
30
5
