Aaaembly(Note: For all nut and bolt
fastening, always use a washer (#17 and #18)
between the tube and bolt or the tube and
nut).
Step 1:
Attach the front and rear upright supports
(#2 and #3) at the top by using bolts (#13),
washers (#17) and plastic nuts (#22).
Repeat the procedure for the other side.
Do not tighten plastic nuts and bolts yet.
See Fig. A - Step 1.
Step 3:
Fasten the lateral cross braces (#4) to the
upright supports (#2 and #3) by using bolts
(#14), washers (#18) and plastic nuts (#21).
See Fig. A - Step 3.
Step 4:
Fasten the rear cross brace (#5) to the rear
upright supports (#2) by using bolts (#14),
washers (#18) and plastic nuts (#21).
Insert the leg caps (#28) into all of base feet.
Tighten all of the nuts and bolts now.
See Fig. A - Step 4 and Step 5.
Step 5:
Fasten one seat and back support brace (#6)
to the seat of two seat assemblies (#7) by
using bolts (#15) and washers (#18).
See Fig. B.
Note:
Make sure the two arcs of the seat and back
support brace (#6) should be facing outside.
Fig. B
Step 2:
At both ends, insert the assembled upright
supports (#2 and #3) into the top cross beam
w/adjustable teeth (#1) See Fig. A - Step 2.
Fig. A
Step 1
Step 2
Step 3
Step 5
2
2
14
14
28
28
28
28
18
18
20
20
21
21
2
2
2
3
3
3
3
4
4
1
1
3
17
17
17
17
19
19
22
22
13
13
Do not tighten bolts
after Step 1. Fasten
all bolts after Fig A.
Step 4
2
2
5
Seat
Seat
Seat
7
7
6
6
7
15
15
20
20
18
18
18
18
PAGE 3 OF 6
STOP
DON’T RETURN TO STORE!
