PAGE 4 OF 5
Fig. E
Step 6:
Hook the suspension springs (#18) into the top of
both swing arm tubes (#8). Do the same procedure
for both sides. See Fig. C.
Warning:
Make sure that both ends of the suspension springs
(#18) go completely through the holes on the top
cross beam w/adjustable teeth (#1) and the swing
arm tubes (#8).
Fig. C
Fig. D
Step 7:
Hang the opposite ends of the suspension springs
(#18) into the holes located on the angled braces
of the top cross beam w/adjustable teeth (#1).
Do the same procedure for both sides.
See Fig. D.
Step 8:
Slide the canopy/frame connectors (#19) into
the canopy (#25). Fasten them together by using
screws (#13) in the pre-drilled holes. Make sure
that the teeth of the canopy/frame connectors are
facing toward the inside of the frame.
See Fig. E - Step 1 and Step 2.
Step 1
Step 2
8
8
8
8
18
18
18
18
18
1
18
25
19
13
13
25
1
E-2
