V-3
Step 3:
Fasten the lateral cross braces (#4) to upright
supports (#2 and #3) by using bolts (#17),
washers (#22), and plastic nuts (#25).
Repeat the same procedure for both sides.
See Fig. A – Step 3.
Step 5:
Insert the leg caps (#12) into all of the base feet.
See Fig. A – Step 5.
PAGE 3 OF 8
Step 1
Step 2
Step 3
Step 4
Step 5
Fig. A
Step 1:
Fasten the front and the rear upright supports
(#2 and #3) at the top by using bolts (#15),
washers (#21), and plastic nuts (#24). Repeat
the same procedure for both sides. Keep the
bolts loose. See Fig. A – Step 1.
Do not tighten the bolts
after step 1. Fasten all
of the bolts after step 5.
Step 2:
At both ends, insert the assembled upright
supports (#2 and #3) into the top cross beam
w/adjustable teeth (#1). Tighten all of the nuts
and bolts now. See Fig. A – Step 2.
Step 4:
Fasten the rear cross brace (#5) to the rear
upright supports (#3) by using bolts (#18),
washers (#22), and plastic nuts (#25). Tighten
all of the nuts and bolts. See Fig. A – Step 4.
15
21
21
21
21
15
17
22
22
25
18
12
12
12
12
22
22
25
2
2
2
3
2
3
3
3
3
3
3
2
2
3
2
4
5
4
3
1
ASSEMBLY (Note: When fastening with nuts
and bolts
,
always use a washer (#21 or #22)
between the tube and the bolt or the tube and
the nut.)
24
24
STOP
DO NOT RETURN TO THE STORE!
