background image

Fig. G

Cleaning and Maintenance

• Wash frame and fabric parts with mild 

  soap and water, rinse thoroughly, and dry 

  completely. Do not use bleach, acid, or 

  other solvents on the frame or fabric.

• The cushions and canopy may be surface washed with mild soap and water if necessary. Commercial foaming 

  upholstery cleaner may also be used. Rinse well and hang to dry. Do not machine wash or dry.

• We recommend the use of furniture covers to protect your swing when not in use.

• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of 

  your swing.

• In order to prolong the life and beauty of your swing, we recommend that the cushions and fabric parts be

  stored in a dry and protected area during off season periods (i.e. overnight or on rainy days).

Special Warnings

1. The user of this swing should always inspect it before each use. 

2. It is essential to place this swing on level ground and not less than 6 feet from any obstruction; such as fences, 

    garages, houses, overhanging branches,laundry lines, or electrical wires.

3. Check the tightness of all of the nuts and bolts on a regular basis.

4. Make sure that the suspension springs are properly secured before each use.

5. Always remove the canopy in heavy wind conditions; otherwise the canopy may tip over and cause damage to

    its parts.

6. The manufacturer will not accept responsibility for unauthorized repairs or modifications to the swing or its parts.

7. Oil all of the metal parts that move regularly.

8. Weight limit is 750 lbs.

STOP    

DON’T RETURN TO STORE!

PAGE 6 OF 6

Step G :

To assure stability, double check that all of 

the bolts have been completely tightened.

Warning :

To avoid danger of suffocation, always keep 

plastic bags or small parts away from babies 

and children.

Warranty

• This product is covered by Courtyard Creations Inc.'s. one–year limited warranty.

• Proof of purchase (dated register receipt) is required for warranty claims. 

• It remains the customer’s responsibility for freight and packing charges to and from the service center.

The store where you made your purchase

does not stock parts for this item.  

If you need parts,

whether they are missing or damaged, 

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

For further assistance, 

please visit us at 

[email protected]

Call Toll  Free:

TEL: 1-877-539-7436

FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT 

YOU HAVE ALL OF THE PARTS LISTED.

IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE 

PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME 

SEPARATED DURING SHIPMENT.

IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 

PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 

1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.

PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:

1-MODEL NUMBER OF THE PRODUCT.

2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS 

   LIST.

MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS 

PRODUCT TO THE RETAILER.    

 

V-3

Summary of Contents for RLS409W













Reviews: