background image

This product meets and exceeds the requirements of OSHA 1910.212(a)(5), the standard which  

regulates electric fan blade safety, and is certified under UL# E355088.

Please note the serial number of your fan, and write it on the back of this User’s Manual for future reference. Your serial 

number is located on upper rear section of mount bar.

READ AND SAVE THESE INSTRUCTIONS

Model Numbers: CL-36-BDF-A,  CL-42-BDF-A,  CL-48-BDF-A

User’s Manual and 

Operating Instructions

Distributed by: TRACTOR SUPPLY COMPANY  5401 Virginia Way

BRENTWOOD, TN 37027

For customer support, call: 1-888-376-9601

IMPORTANT: 

Read and understand all of the instructions in this manual before assembling, 

starting, or servicing the fan. Improper use of this fan can cause serious injury. Keep this manual for 

future reference.

For General Ventilating Use Only.  Do Not Use To Exhaust Hazardous Or Explosive 

Materials And Vapors.  Never use the fan in spaces which contain products such as 

gasoline, solvents, paint thinners, dust particles, volatile or airborne combustibles, or any unknown 

chemicals.

CAUTION

CLFB-400

E355088

Summary of Contents for CL-36-BDF-A









Reviews: