Operation
TO START FAN:
1. Be sure the Power Switch is in the OFF position.
2. Connect to an approved power source.
3. Make sure area is clear from all obstructions.
4. Push Power Switch to the LOW position and allow to
operate for 10 seconds.
5. Once 10 seconds have passed, you may now push the
Power Switch to the HIGH position.
TO TURN OFF FAN:
1. To turn off the fan, simply return Power Switch to the
middle (OFF) position.
NOTE:
For longer parts life, after 10 hours of
continuous operation, turn fan off for 15 minutes to
allow motor and fan belt to cool.
NOTE
:
This fan is equipped with a 2-speed control switch.
figure 1: Wheel Assembly
NEVER LEAVE A FAN
UNATTENDED WHILE
OPERATING OR WHILE
CONNECTED TO A POWER
SOURCE
Portable Air Circulator User’s Manual For customer support, call 1-888-376-9601 www.TractorSupply.com
3
Installation
Locate fan in safe, desired position on level ground, and connect to approved power source.
Assembly
Attaching The Wheels
1. Slide wheel axle through wheel support
frame.
2. Slide one (1) wheel onto either side of axle.
3. Secure wheel with one (1) cotter pin.
1
2
3
