ENGLISH
7
ASSEMBLY INSTRUCTIONS
NOTE: For all of the following steps, do not tighten any screws completely until all screws for that step have been
installed. Once all screws have been installed, then tighten them securely.
1. MOUNTING THE LEGS TO THE GRILL
Parts Required:
1 x Main Barrel/ Hopper Assembly
(#7)
2 x Foot Assembly
(#10)
Installation:
• Remove the pre-installed screws from the bottom shelf. Secure the
bottom shelf to two legs using six screws.
2. ASSEMBLING THE LID HANDLE
Parts Required:
1 x Lid Handle
(#6)
2 x Lid Handle Bezel
(#5)
Installation:
• Remove the pre-installed screws from the lid handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add bezel on the
screw, then hand-tighten the screw into the lid handle.
• Repeat for other side.
ASSEMBLY PREPARATION
Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister
pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill
before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not
attempt to assemble. Shipping damage is not covered under warranty. Contact your dealer or Country Smokers® Customer
Service for parts: Monday through Sunday, 4am - 8pm PST (EN/FR/ES).
[email protected] | Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135
IMPORTANT: To ease installation, using two people is helpful (but not necessary) when assembling this unit.
Tools required for assembly:
screwdriver and level.
Tools not included.
1
2
Summary of Contents for 10497
Page 25: ...ENGLISH 25 ...
Page 51: ...FRANÇAIS 51 ...