Version 1.0
Page 20
INSTALLATION / PRECAUTIONS
IMPORTANT:
Read all instructions carefully before starting installation. Failure to
follow these installation instructions may result in a possible fire hazard
and will void the Country Flame warranty.
1.
Look at the label on the back of your unit to find the serial number. Write the serial
number of the unit on the Table of Contents page immediately. Failure to do so will make
servicing and maintenance questions difficult to answer and could result in needless
inconvenience in the future. You will need the serial number of your unit if it requires
servicing.
2.
When installing appliance
A.
When installing heater as an insert or as a freestanding unit, adequate clearances
must be strictly adhered to.
B.
Allow for adequate accessibility for servicing and proper operations.
C.
When establishing clearances, measure from any combustible projection, such as;
shelves, windowsills, fireplace mantles above the appliance, etc.
D.
Proper vent installation is required for safe, reliable operation. Follow vent
manufacturers instructions closely.
WARNING: OPERATION OF THIS HEATER WHEN NOT CONNECTED TO A
PROPERLY INSTALLED AND MAINTAINED FLUE VENTING SYSTEM IS DANGEROUS.
•
DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS
UNIT.
•
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER
APPLIANCE.
•
MAINTAIN VENT PIPE CLEARANCES AS SPECIFIED BY THE VENT PIPE
MANUFACTURER.
