Page 6
Operation & Maintenance Manual - Vision Chilled Displays
Operation
1.8 - INSTALLATION OF WALL-SITED CHILLED VISION DISPLAYS
It is important that any free standing chilled wall unit is positioned correctly to ensure that an adequate intake and exhaust
airflow is provided. This has been achieved by the fitting of rear wall stops 100mm in depth as standard. These stops are
supplied loose together with fixings inside the O&M manuals. These stops must be fitted by the person installing the display.
The wall stops must not be removed under any circumstances as they create the necessary space through which the ex
-
haust hot air from the compressor unit will escape.
None fitting or removal of the wall stops will invalidate the product warranty and any subsequent
service calls maybe chargeable.
If a unit is fitting into an alcove or similar design, attention by others is required to ensure that the escaping exhaust hot air is
not restricted by overhead display signage or bulkhead designs.
