Coto baby Salsa Q, User Manual

Page: 17 / 71

11
GB
INSTRUCTION MANUAL
Group I (9-18 kg) child car seat fitting.
a) Adjust the child car seat to the sleeping position 3 or 4 (fig. 3).
b) Release the lock-off device securing the backrest by pulling the lever upwards and
remove the metal inner rod (fig. 4).
c) Pull the backrest forward and then thread the seat belt between the backrest and
the child car seat base and clip it into the backle (make sure the seat belts is not
twisted). The seat belt should run across the top of the base, through the shaft and
lock and lap belt hook to the buckle (fig. 5). Next pull the seat belt tight to secure
the child car seat.
d) Push back the backrest, insert the metal inner rod and then lock the lock-off
device by pushing the lever down (fig. 6).
e) Adjust the child car seat to one of the four positions.
Group II (15-25 kg) ad Group III (22-36 kg) child car seat fitting.
This method of fitting the child car seat is intended for Group II (15-25 kg) and Group
III (22-36 kg) children.
a) It requires the removal of the 5 point harness from the child car seat together with
the shoulder belt pads, central buckle and the crotch strap (see: „Adjusting the
height of the shoulder belts” in the instruction manual).
b) Adjust the height of the headrest by pulling the liffting handle.
c) Place the child in the seat.
d) Attach the child car seat to the car seat with the seat belts, so that the shoulder
belt is slotted through the correct guide slot for your child’s group (fig. 7,8), and the
lap belt through the 2 lap belt guides (fig. 9).
e) Buckle the seat belts (fig. 10).