11
A: Read Charger Wizard Setting
B: Save the Easy Charger Wizard setting to EEPROM
C: Transfer the setting values of the software on the PC to the Charger
Wizard
D: Set the communication interface, battery type, reset, archive, archive
before loading and other function settings
E~S: The charging current and charging voltage parameters can be
entered manually or drag the parameter. The maximum setting will
depend on the rated voltage and current of SMPS (Cotek AE/AEK). It
will also reference to the rated battery voltage selected by the operator.
Parameters as follow:
E~I: BULK(C.C) Parameter:
⚫
Fixed charging current is 'G' in BULK mode
⚫
Conditions to enter the ABSORPTION mode (either one):
1. Start timing 'H' when the battery voltage reaches the 'E'
voltage
2. When the battery voltage reaches the 'F' voltage and the time
is maintained 'I'
⚫
J~M: ABSORPTION (C.V) Parameter
⚫
Fixed charging voltage is 'J' in ABSORPTION mode
⚫
Conditions to enter the
FLOAT Mode (either one):
1. When the time in this mode exceeds 'L'.
2. When the charging current is less than 'K', and the time is
maintained above 'M'.
⚫
N
、
O
、
Q
、
R. FLOAT Parameter:
⚫
Repeat steps 1 and 2 after entering FLOAT mode
