WARNING!
To turn “ON” the SD-series by operating the –ENB
function of LCD Panel, the SD-series inverter cannot
be turned OFF by any other operations, only by the
MAIN “OFF” SWITCH.
ALM-Battery is common ground.
RJ-45 port, connect to inverter(reference 3 )
˙
ALM (PIN1)
When the SD-series
has the warning or the
protection displayed,
simultaneously this
“ALM” pin will changing
output to 5 Volt / 10mA
control signal to provide
the user.
˙
ENB (PIN3)
User can USE this
“-ENB” pin to control the
SD-series to turn ON or
turn OFF.
˙
-Vcc (PIN4)
This is LCD remote control panel ground.
4
