4
English
11. Do not abuse the cord.
Never carry the tool by the cord or pull it to disconnect it from the socket. Keep the cord
away from heat, oil and sharp edges.
12. Secure work.
Use clamps or a vice to hold the work. It is safer than using your hands and it frees both
hands to operate the tool.
13. Do not overreach.
Keep proper footing and balance at all times.
14. Maintain tool with care.
Keep cutting tools sharp and clean for better and safer performance. Follow instructions
for lubrication and the changing accessories. Inspect the mains lead periodically and
if damaged have it repaired by an authorized service facility. Inspect extension cords
periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease.
15. Disconnect the power.
When not in use, before servicing and when changing accessories such as blades, bits
and cutters.
16. Remove adjusting keys and wrenches.
Form the habit of checking to see that keys and adjusting wrenches are removed from the
tool before turning it on.
17. Avoid unintentional starting.
Do not carry a plugged-in tool with a finger on the switch. Ensure switch is off when
plugging in.
18. Use outdoor extension leads.
When tool is used outdoors, use only extension cords intended for outdoor use.
19. Stay alert.
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
20. Check damaged parts.
Before further use of the tool, a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check
for alignment of moving pans, free running of moving parts, breakage of pans, mounting
and any other conditions that may affect its operation. A guard or other pan that is
damaged should be properly repaired or replaced by an authorized service centre unless
otherwise indicated in this instruction manual. Have defective switches replaced by an
authorized service facility. Do not use the tool if the switch does not turn it on and off.
21. Use recommended accessories.
The use of any accessory or attachment, other than those recommended in this instruction
manual, may present a risk of personal injury.
22. Have your tool repaired by a qualified person.
This electric tool complies with the relevant safety requirements. Repairs should only be
carried out by qualified personel using original spare parts, otherwise this may result in
considerable danger for the user.
Summary of Contents for YT4646
