5
EN
G
LI
S
H
e. Inspect handheld power tools regularly. Check that all settings are correct, that
no moving parts are getting jammed, that no parts are broken and for anything
else that might cause the handheld power tool to malfunction. If something is
damaged it must be repaired before use. Many accidents are caused by poorly
maintained handheld power tools.
f. Keep the tools sharp and clean. Properly maintained cutting tools with sharp
blades are less likely to jam and are easier to control.
g. Use the handheld power tool, accessories and such according to the instructions
and in a way suitable for the type of handheld power tool used. Using the
handheld power tool for work other than that for which it is intended could result
in a dangerous situation.
5) Use and maintenance of the rechargeable handheld power tool
a) Make sure that the power switch is set to OFF before the battery is inserted.
Inserting a battery into a handheld power tool with the power switch set to
ON is inviting an accident.
b) Only charge the battery using a charger approved by the manufacturer.
A charger suitable for one type of battery can constitute a fire hazard if
used for another type of battery.
c) Only use the rechargeable power tool with the correct batteries. The use
of another type of battery can create the risk of damage or fire.
d) When not in use, the battery should be stored away from other metal objects
such as paper clips, coins, keys, nails, screws or any small object that could
bridge the gap between the battery terminals. A short circuit of the battery
terminals can cause burns or fires.
e) If the battery is abused it can leak acid; avoid contact with this acid. If you
accidentally come into contact with the acid, rinse with water. If the acid comes
into contact with your eyes, consult a doctor. Battery acid can cause irritation
and burns.
6) Service
a. Repairs and service should only be performed by qualified persons, and only
with original spare parts. This guarantees the safety of the handheld power tool.
Summary of Contents for PLCT0301
Page 2: ...2 ...
