11
EN
GL
IS
H
Symptom
Possible cause
Remedy
The machine does
not start.
No power.
Check the power point.
Worn brushes.
Contact us in case of motor
or electrical faults.
Short circuit.
Faulty power switch.
The machine
runs slowly.
Worn/damaged cutter/bit.
Sharpen or change
the cutter/bit.
Speed too low.
Do not press down too hard.
The motor is overheated.
Strange noise.
Mechanical fault.
Contact us in case of motor
or electrical faults.
Faulty windings.
Strong vibrations.
Loose cutter/bit.
Tighten the tool and make
sure it is set correctly.
Sparks in the motor.
Brushes jammed.
Contact us in case of motor
or electrical faults.
Winding short circuited.
Dirt on commutator.
Troubleshooting
Maintenance
Warning:
• Always unplug the machine before carrying out any maintenance or repairs.
• Always keep the motor’s ventilation openings free of dust and debris.
• Regularly clean the machine using a cloth moistened with a little detergent.
• Never use solvents.
Disposal
Follow local ordinances when disposing of this product. If you are
unsure about how to dispose of this product contact your municipality.
