Cotech LS5T-52, User Manual

Page: 8 / 60

8
EN
GL
IS
H
Working with the log splitter
1. Always place the side with the least amount of knots against the splitter and always cleave with the grain.
2. Place the log so that it is stable. Use the work bench lateral supports.
3. Start the motor by pressing and then holding down the switch.
4. Start the hydraulics by moving the operating lever down.
5. The pressure plate on the piston rod will now press the piece of wood against the splitter.
6. Release the operating lever and switch to complete the splitting. The return springs now pull the piston rod back.
Note!
• If splitting does not start within 5 seconds in spite of full pressure: release the operating lever and switch and
let the pressure plate retract. Then turn the log 90 degrees or turn it around and try again.
• Close the air screw (13) during transport and when storing the machine as oil can seep out. When storing
the machine with the air screw open for long periods of time, the oil absorbs moisture from
the air which can lead to the hydraulic system rusting inside.