4
English
9. Always make sure that all clamp screws are tight before beginning to saw, even if the table is fixed at a firm angle.
10. Make sure that the blade and the flanges are clean and that the spindle nut is tight, use only the blade flanges that
belong to your particular saw.
12. Use only blades 254 mm in diameter and the right speed classification (at least 6000 rpm)
13. Use proper extra support when sawing long work pieces.
14. Before sawing, always make sure that the blade is not cracked or damaged. Such blade should immediately be
replaced.
15. Do not use the saw if any component to the saw is missing, damaged, or faulty, unplug the power cord to the saw if
it starts making a strange noise or vibrating. Let a professional replace the missing or damaged component before
you use the saw again.
16. Never use the saw if the covers are not in place or do not work problem-free.
17. Never reach around or behind the blade while it rotates. Stand firmly so that you can always keep your balance.
18. Make sure that the blade can rotate freely (especially after transport and/or blade replacement) before plugging in
the saw and starting it.
19. Never lock the switch in the ON position.
21. Caution: When you have cut clear through the work piece, release the power switch and wait until the blade has
stopped rotating before lifting up the saw head.
22. Release the power switch and wait until the blade has stopped before moving the work piece or changing settings.
23. Do not remove stuck or cut-off pieces until the blade has stopped.
24. Never saw through ferriferous metals or through brick or mortar.
25. Never use the saw in the proximity of highly inflammable gases or liquids.
26. Never clean the plastic parts of the saw with a dissolvent. Dissolvents may melt the plastic or damage the material
in other ways. Only clean with a soft, damp cloth.
27. Unplug the power cord and clean the saw before leaving it. Make sure that the work space is clean when finishing
the work.
28. Save this operations manual. Read through it often and use it to instruct others. Make sure that all persons using
the saw read these instructions.
29. Do not expose the saw to rain and do not use it in damp environments.
30. Arrange for good lighting in the work area.
31. Use suitable work clothes. Loose fitting clothing or jewellery may get caught in the rotating parts.
32. A user should be at least 18 years of age. Users below the age of 16 should be supervised by an instructor while
using the saw. Keep children away from the saw while it is connected to a power source.
33. Keep your work place tidy and do not allow debris or other garbage to be present unnecessarily. Make sure that the
waste can be removed from the saw blade, or it may be dispersed by the saw blade.
34. Do not distract people operating the saw.
35. Do not attempt to stop the blade by pushing something against the side of the blade after you have turned off the
power to the saw.
36. Never use saw blades that do not correspond to the specifications in the manual.
37. It is important to check that all blade guards covering the saw blade are functioning well.
38. Never lock the protective cover in an open position and never disassemble the cover of the machine and do not
change its function. Never use a damaged or faulty safety device, but replace it immediately.
39. Be sure to place your hands safely, so that they do not slip in under the saw blade if you lose your balance. Never
saw through work pieces so small that they cannot be held safely.
40. Use a table, roll-stop, etc. as support when working with long work pieces, so that the machine does not tip over.
41. Clamp round work pieces with appropriate devices, so that they cannot rotate.
42. Never saw through work pieces containing nails or other foreign objects.
43. Always stand at the side of the saw blade while the machine is in use, so that the blade does not strike you if it
should brake.
44. Always press the work piece against the table and the fastening device so that it cannot turn or move during the
sawing.
45. Never saw through several work pieces simultaneously.
46. Never try to remove dust, flakes, or wood that has attached itself while the blade is rotating. If you must adjust the
Summary of Contents for J1X-JF3-255/07
Page 43: ...43...
