5
EN
GL
IS
H
20
24
23
21
25
22
26
Remote control
The buttons on the remote control correspond with
the buttons on the control panel as described above.
20.
On/fan speed selector
21.
Mode, fan mode
22.
Horizontal louvre adjustment
23.
Off
24.
Cooling and humidification function
25.
Timer
26.
Vertical louvre oscillation on/off
Remote control battery
1. To change the battery, open the battery drawer by
pressing in the spring catch and pulling the drawer out.
Follow the markings on the back of the remote.
2. Insert a new battery (CR2032). Make sure that
the positive (+) terminal is facing upwards, towards you.
Note the polarity markings on the back of the remote
control and in the battery drawer to ensure correct
insertion.
3. Slide the battery drawer back into the remote control.
Operating instructions
Note:
If the air cooler should fall over when it has water in the reservoir, there is a risk of it causing
an electric shock and it must not be used.
Switch the air cooler on by pressing either [ ON/SPEED ] on the control panel or
on
the remote control. The air cooler has the following default settings when it is switched on:
-
Fan mode – normal
-
Vertical louvre oscillation – off
-
Louvre opening – 127°
-
Cooling and humidification – off
-
Fan speed medium for 3 seconds, then low
-
Timer – off
These settings can be adjusted using the control panel or remote control as described above.
