EN
G
LI
S
H
c) Avoid accidental starting. Make sure that the switch is set to OFF before
you connect the device to the wall socket.
Never carry an electrical hand
tool with one finger on the trigger or never connect the hand tool to a wall
socket when the switch is set to ON, since it may result in personal injury.
d) Remove all service tools/keys before switching on the hand tool.
A forgotten service tool on a rotating part of the electrical hand tool may result
in personal injury.
e) Do not overreach. Make sure you stand steady and well balanced at all
times.
This gives better control in unexpected situations.
f) Wear suitable clothing. Do not wear loose fitting clothes or jewellery.
Keep hair, clothes and gloves away from movable parts.
Loose fitting
clothes, jewellery or long hair could get caught in movable parts.
g) If the equipment for suctioning or collecting dust is available make sure
it is connected and used properly.
Using technical aids may reduce dust
related hazards.
4) Use and maintenance of electrical hand tools
a) Do not force the hand tool. Use a hand tool suitable for the work you are
to perform.
At the correct rate of feed, the correct tool will carry out the work
better and more safely.
b) Never use the electrical hand tool if the switch does not work properly
to turn on and shut off the tool.
All electrical hand tools that can not be
operated by the switch are dangerous and must be repaired.
c) Unplug the lead from the wall socket before making any adjustments,
changes of accessories or storing the electrical hand tool away.
These
precautions reduce the risk of unexpected start of the electrical hand tool.
d) Store electrical hand tools that are not being used out of reach from
children. Do not let people unfamiliar with the electrical hand tool or its
instructions use it.
Electrical hand tools can be dangerous if they get into the
hands of inexperienced users.
e) Maintenance of electrical hand tools. Check if something is incorrectly
set, if movable parts are getting jammed, or parts are broken or
something else that might cause the electrical hand tool to malfunction.
If something is damaged it must be repaired before use.
Many accidents
are caused by poorly maintained electrical hand tools.
f) Keep the tools sharp and clean.
Properly maintained cutting tools with sharp
blades are less likely to jam and are easier to control.
g) Use the electrical hand tool, accessories and such according to the
instructions and in a way suitable for the type of electrical hand tool used.
Using the electrical hand tool for work other than that for which it is intended
could result in a dangerous situation.
Summary of Contents for DC-SD-200B
Page 2: ......
