8
EN
GL
IS
H
Chute
Note:
Make sure that there is no gap between
the upper part and lower parts of the chute.
1. Undo the wing nuts holding the upper part
of the chute in place just enough to enable
you to lift the top of the chute.
2. Set the top of the chute in the desired
position and lock it in place using
the wing nuts.
Chute direction crank
1. Slot the two parts of the crank together and
fasten using the included nuts and bolts.
2. Slot the crank into its hole at
the base of the chute and fasten it.
3. Mount the crank’s eyelet through
the hole in the middle handle and
tighten its retaining nut to secure it.
Summary of Contents for DB5013
Page 2: ...2...
