GREAT BRITAIN • CUSTOMER SERVICE
contact number: 08545 300 9799
e-mail: [email protected] internet: www.clasohlson.com/uk
EN
GL
IS
H
1
2
3
4
5
6
7 8 9
10
11
12
Ver
. 20131029
LED Work Light
Art.no 36-4458 Model SL2882
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact
Customer Services.
Safety
•
Always place the floor stand on a stable surface so it cannot tip over.
•
Never position the light so that it shines directly onto a wall socket.
•
Never cover the product when it is in use.
•
Never leave children alone with this product.
•
The minimum distance to an object placed in front of the light
is 1 metre.
•
Do not use the light in humid environments and keep it dry.
The product is not waterproof.
•
Never place the product close to a wash basin or bathtub
if there is a risk that it might fall in.
•
Do not use the product in environments containing flammable
liquids or gases.
•
Do not subject the product to extremely high temperatures or fire.
•
Do not use the product if it has been damaged.
•
Never dismantle the product. None of the parts, except
the battery, are replaceable.
•
Never look directly into the beam and do not shine the light
at another person’s eyes.
Product description
LED work light with three flexible and bendable legs. Can be stood on
its legs or wrapped around a pipe. Ball-jointed light holder which enables
360˚ rotation. The lamp unit can be detached from the legs and used as
a torch. Can also be attached using the provided magnet. Rubberised
legs for a non-slip grip. Two constant beam settings and a flashing setting.
Buttons and functions
Use
Position the product in the desired location.
•
Push the beam selector once for high power beam setting.
•
Push it once again for low power beam setting.
•
Push a third time to turn the light off.
•
Push and hold in the button for 5 seconds for a flashing beam.
Detaching the light from the flexible legs.
•
Slide the light out of the light holder.
•
Once detached from the legs, the light can be attached to ferrous
metal surfaces using the magnetic discs.
Attaching the light to the flexible legs.
•
Slide the light back into the light holder. Make sure that the holder is
pointed inwards. A click is heard when the light is inserted correctly.
Changing batteries
1. Unscrew and remove the battery cover.
2. Pull the battery strap and remove the old batteries.
3. Insert new batteries. Refer to the markings in the battery compartment.
4. Replace the battery cover.
Care and maintenance
Clean the product by wiping it with a soft dry cloth.
Never use abrasive cleaning agents or solvents.
Troubleshooting guide
The light does not work.
•
The battery cover screw could be loose, tighten it.
•
The batteries could be discharged, replace them.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
of how to dispose of this product, please contact your local authority.
Specifications
Work Light
20 cool white LEDs
Power Source
3 × AA/LR6 batteries (not included)
1. Push button for
beam selection
2. 20 cool white LEDs
3. Flexible legs / tripod stand
4. Battery cover
5. Screw for battery cover
6. Magnetic discs
7. Battery compartment
8. Screw hole for battery cover
9. Battery strap
10. Light holder
11. Fastener
12. Magnetic base
