9
EN
G
LI
SH
Rain gauge
1. Remove the water collector by turning it in the direction of the arrow and then
lifting it upwards.
2. Remove the battery cover.
3. Insert 4 × AAA/LR03 batteries.
The unit will begin to transmit data once
every 60 seconds.
4. Replace the battery cover.
Thermometer/hygrometer
Note:
• If you are to connect any additional thermometers (other than that which is supplied),
these must be set so that they transmit on different channels. This is done by
altering the DIP switches in the battery compartment. A total of 8 thermometers
may be connected.
• Ensure that the DIP switches have been set before you insert batteries into the sensor.
