EN
G
LI
S
H
Care and maintenance
• Always keep the motor’s ventilation openings free of wood and metal chippings.
• Clean the machine with a moist cloth, and with a mild detergent if available.
Avoid cleansers and solvents.
Trouble shooting
Problem
Possible cause
Possible solution
Machine is
not working
1. No current
2. Worn carbon brushes.
3. Short circuit.
4. Defective switch.
1. Check that the wall socket is live.
2,3,4. Contact customer service
in case of motor breakdown or
power failure.
Machine
runs slow.
1. Worn or damaged disk.
2. Rpm too low.
3. Motor is overheated
1. Renew the disc or replace it.
2. Do not apply excessive pressure.
3. Do not apply excessive pressure.
Unusual
sound is
heard.
1. Mechanical obstruction
2. Intermittent short circuit
on coil.
1. Contact customer service.
2. Contact customer service
Heavy vi-
brations.
1. Disk is loose
1. Tighten disk and check that it is
correctly installed
Spark for-
mation.
1. Jammed carbon bruches.
2. Short circuit on coil.
3. Short circuit on current
collector.
Contact Customer Service.
Disposal
If or when you should decide to discard the product, please follow local
regulations. If you are unsure what to do, contact your local authorities.
Specifications
Power:
230 V ~ 50 Hz
Capacity:
450 W
Rpm, not loaded:
4000 – 13000
Sanding disc:
125 + 150 mm
Noise load (LpA):
100 dB(A)
Noise level (LWA):
104 dB(A)
Vibration parameter: 3.5 m/s²
Summary of Contents for 18-3047
Page 23: ...23...
