8 Common failures and processing method
、
9
、
Product maintenance
1
、
lubrication
When the running machine is used for a period of time, it must be lubricated with special methyl silicone oil.
Advice：
1 hour or less per week lubricate once every 6 months
Less than 3 hours per week lubricate once every 3 months
3-6 hours per week lubricate once every 2 months
More than 6 hours per week lubricate once a month
Do not lubricate too much. It is not the more lubricants the better.
Remember: Proper lubrication is an important factor in improving the life of the treadmill.
2
、
As for the way to check if you need to add lubricant.
Just grab the running belt and touch the middle of the running belt back
with your hands as much as possible.You don’t need to add lubricant if you have
silicone on your hand (a little damp) You have to add lubricant if the pad is dry
and there is no silicone on your hand.
the step of lubricate on the running plate (as shown in the right picture)
Stop running and fold the machine.
Lift the running belt of the underside of the main
body,Put the oil pot as far as possible into the
middle of the running belt. And spray methyl
silicone oil inside of the running and both sides.
You can make use of the treadmill speed of 1km/h
to evenly lubricate and step on the running belt fro
m left to right. After a few minutes, the methyl
silicone oil can be completely absorbed by the running belt.
3
、
Adjust tightness of running belt, All treadmills shall be adjusted for tightness before
delivery and after installation. However, the running belt may be loosened after a period of use.
For example,The treadmill had stopping and slipping question during exercise.Adjust bolts of
running belt with the left and right synchronous as per clockwise direction to half a circle as the
unit when this phenomenon occurs.The feet will slip if the running belt is too loose.
But it is not good to be too tight. It is easy to increase the load of the motor and damage the
motor,running belt and roller etc.
4
、
Running belt deviation adjustment
All treadmill belts need to be adjusted before delivery and after installation.But the running belt may be
deviated after a period of use which may be caused by the following reasons.
①
The main body is not placed smoothly.
②
The feet of users are not in the center of the running belt.
③
The feet of users are uneven force
15
16
