Check after Installation
Step 7:
As shown in Figure 7, the inner oval tube assembly is aligned with the
outer oval tube assembly tube, and the marble is pressed to adjust it to a suitable
height.
Step 8:
As shown in Figure 8 and Figure 9, the M8 Torx knob is aligned with the
nut on the outer oval tube assembly to lock it.
1. Whether the bedside table trolley is installed correctly and whether the four
legs are flat, please refer to the manual diagram for comparison.
2. Verify that all the accessories of the bedside table trolley are fully assembled,
and you can check for extra accessories.
3. Check whether the installation of the bedside table trolley is loose.
4. Check whether all components of the bedside table trolley are skewed, and you
can make appropriate adjustments.
Product Maintenance and Maintenance Methods
1. Do not scratch or scrape the surface of the product with hard objects to
prevent material damage.
2. For daily cleaning and maintenance, apply neutral synthetic detergent, and
wipe with a damp cloth, and then wipe with a dry cloth.
3. Do not contact with strong acids and alkalis to prevent corrosion.
Storage Conditions and Methods
After packaging, the bedside table trolley should be stored at a temperature of 14
℉
(-10
℃
) to 104
℉
(40
℃
) and a relative humidity not exceeding 80%. No
corrosive gas and well ventilated, clean room. Keep away from moisture, light
and heat during transportation.
Figure 7
Figure 8
Figure 9
A1
A2
A3
A4
B1
05
