Step 3:
As shown in Figure 3, align the outer oval tube assembly with the
corresponding holes of the chassis assembly, take out 1 hex socket head screw
(M6*65) and 2 φ6.2 washers to connect them. Use a 4 # Allen key and a 10#
open-end wrench to lock the M6 self-locking nut.
Step 4:
As shown in Figure 4, take out the M6 triangular screw, align the outer
elliptical tube assembly with the corresponding hole of the chassis assembly, and
lock it.
Step 5:
As shown in Figure 5, first put the compression spring into the adjusting
inner oval tube assembly, and then insert it into the round tube of the tabletop
assembly and push it to the end.
Step 6:
As shown in Figure 6, use a switch wrench to penetrate the φ10.2
washer and the iron pipe sleeve to align and adjust the inner elliptical pipe
assembly to lock the inner nut.
Figure 3
Figure 4
Figure 5
Figure 6
A2
B6
B5
B5
B4
A1
A1
B2
A2
B9
B10 B8
A3
A4
B11
04
